Page Content
For Multi-Mon and PowerSmart Meters
Current sensors for Multi-Mon and PowerSmart meters are available as split and solid core sensors and are ordered by the piece. They can only be used with Multi-Mon and PowerSmart meters. Sensors are not compatible with other styles of Honeywell meters.
Key Features
- All sensors 600V rated
- 2.5 Meter cable length for all sensors
- Split Core available in values from 100A to 1200A
- Solid Core available in 100A and 400A
For H-Series Meters
Key Features
- Split-core current sensors are supplied with Honeywell Class 100, 200, 320, 500 and Green meters.
- Current sensors can be installed up to 2000 feet away from meter. Leads supplied are 3' in length and can be extended up to 2000 feet using low voltage #14-22 AWG wire. (stranded/twisted not required) See local electrical codes for proper sizing.
- When paralleling current sensors, the meter reading must be multiplied by the number of sets of current sensors in parallel.
Key Features
- Split-core current sensors: 0.333V standard, 100mA optional; solid-core 0.333V and 100mA, optional.
- The standard meter kit for either configuration comes with 0.333V split-core current sensors, but 0-100mA output current sensors and solid-core sensors are optionally available.
- Fully Encapsulated
- Split Core Sensors available in the following amperages: 100A, 200A, and 800A.
- Solid Core Sensors available in the following amperages: 100A and 200A.
Note: These current sensors cannot be used with any other Honeywell Submeter products.
Ordering
Submeter part numbers can be determined by following the part configuration guide provided in the downloaded/printed
H-Series brochure, or simply use the
spreadsheet with description and pricing for the most common submeter options.
