Overview
Electronic-Pneumatic Transducers are used in electronic-pneumatic control systems to convert a proportional electric output signal from a controller into a direct-acting, proportional pneumatic signal.
Features
- Screw mounting or snap rail (models with cover).
- Factory calibrated.
- Dual barb fittings.
- High accuracy.
Product Specifications
- Application
- Electric to pneumatic Transducer
- Airflow Usage
- 0.025 scfm (117mL/s)
- Dimensions (in.)
- 2 7/16 in. wide x 3 3/8 in. high x 1 7/8 in. deep
- Dimensions (mm)
- 62 mm wide x 86 mm high x 48 mm deep
- Maximum Safe Operating Pressure (psi)
- 30 psi, maximum
- Maximum Safe Operating Pressure (kPa)
- 205 kPa, maximum
- Temperature Range (F)
- 131 F, maximum
- Temperature Range (C)
- 55 C, maximum
- Includes
- Without cover, external transformer required, 24 Vac, 50/60 Hz, (3 wire)
- Electrical Connections
- screw terminals for 14 to 22 gage wire
- Operating Humidity Range (% RH)
- 5 to 95% RH
- Voltage
- 24 Vac external transformer
- Pressure Range (psi)
- 0 to 18 psi; Output--3 to 15 psi
- Pressure Range (kPa)
- 0 to 125 kPa; Output--21 to 103 kPa
- Input Signal
- 2 to 10 Vdc at 0.1 mA max
- Air connections
- Dual barb-fittings for 1/4 in. or 5/32 in. O.D. plastic tubing
- Capacity
- 0.45 scfm (211 mL/s)
- Nominal High End (psi)
- 16 psi with 18 psi main pressure at 12 Vdc or 16 psi at 11 Vdc ( min. )
- Nominal High End (kPa)
- 116 kPa with 125 kPa main pressure at 12 Vdc or 110 kPa at 11 Vdc ( min. )
- Nominal Low End (psi)
- 0.5 psi at 0 Vdc
- Nominal Low End (kPa)
- 3.5 kPa at 0 Vdc
- Current
- 16 mA
There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.