Skip Ribbon Commands
Skip to main content
SharePoint
  • Product Info
  • Literature

Overview

The Q7002 Interface Modules allow controllers with an otherwise incompatible signal to control an Economizer Logic Module or Direct Coupled Actuator.

Features

  • 24 Vac or 24 Vdc power.
  • Available for input signals: dc voltage, current, or resistive; and pulse-width modulation (PWM).
  • Available to provide output: analog voltage or current for an actuator.
  • Inputs and outputs are jumper-selectable and include adjustable zero and span.
  • Output is jumper-selectable direct or reverse acting.
  • Includes reference voltage and current to power an input device or sensor.
  • PWM time base is user-selectable with positive or negative input reference; all ranges have 255-step resolution.
  • Multiplex mode enables one PWM signal from a Building Automation System (BAS) controller to address and control up to eight interface modules.

Product Specifications

Used With
Direct-Coupled Proportional Actuators and Modutrol Motors
Comments
Input: PWM signal, Output: analog voltage
Item Type
Accessory
Mounting
Enclosure (NEMA 1) with mounting tabs
Frequency
60 Hz
Supply Voltage
24 Vac ±20%; 24 Vdc
Output Burden
0 to 20 mA < 500 ohm; 0 to 10 Vdc > 500 Ohm
There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.