Skip Ribbon Commands
Skip to main content
SharePoint
  • Product Info
  • Literature

Overview

The ML6421A,B Non-Spring Return Electric Linear Valve Actuators are suitable for use with low-voltage, single-pole double-throw (spdt), Series 60 two-position and floating controllers. These actuators operate standard Honeywell valves in heating, ventilating, and air conditioning (HVAC) applications. The ML7421A,B Non-Spring Return Electric Linear Valve Actuators are modulating control actuators used with control that provide an analog output of 0 to 10 Vdc or 2 to 10 Vdc. These actuators operate standard Honeywell valves in HVAC applications. An internal selector plug can be used to reverse the direction of action.

Features

  • Easy and quick installation on valves with 1 3/8 in. bonnet and 3/4 in. stroke, or with 1 7/8 in. bonnet and 1 1/2 in. stroke
  • High force for VGF Pressure-balanced valves
  • No separate linkage required
  • Conduit connector standard
  • No adjustments required on linkage
  • Accurate valve positioning
  • Low power consumption
  • High close-off ratings
  • Force limiting end switches
  • Manual operator
  • Synchronous motor
  • Maintenance free

Product Specifications

Application
HVAC
Dimensions (in.)
12 3/4 in. high x 7 in. wide x 7 in. deep
Dimensions (mm)
326 mm high x 178 mm wide x 178 mm deep
Includes
1/2 in. flexible conduit adapter; 1/2 in. conduit hub
Weight (lb)
5.1 lb
Weight (kg)
2.3 kg
Materials
ABS Plastic
Item Type
Product
Mounting
Directly on V5011/V5013 Globe Valves and VGF Flanged Globe Valves
Frequency
50 Hz; 60 Hz
Approvals, Underwriters Laboratories Inc.
Flammability Rating UL94V-5V
Approvals, Canadian Standards Association
Certified
Electrical Connections
Screw terminals
Operating Humidity Range (% RH)
5 to 95% RH
Supply Voltage
24 Vac +10%, -15%
Power Consumption
Driving-- 12 VA
Shipping and Storage Temperature Range (F)
-40 F to +158 F
Shipping and Storage Temperature Range (C)
-40 C to +70 C
Approvals, CE
Recognized
Ambient Temperature Range (F)
14 F to 122 F
Ambient Temperature Range (C)
-10 C to +50 C
Environmental, Electrical or Ingress Protection Rating
Class I Insulation (24 Vac),IP54
Internal Auxiliary Switch
0
Fluid Temperature (C)
150 C Maximum
Fluid Temperature (F)
300 F Maximum
Actuator Type
Valve
Control Signal
0 to 10 Vdc; 2 to 10 Vdc
Fail Safe Mode
Stays in place
Torque Rating (lb-in.)
405 lbf
Torque Rating (Nm)
1800 N
Switches
Yes
Stroke (in.)
1 1/2 in.
Stroke (mm)
38 mm
Cable
Two knockout holes for 1/2 in. conduit standard on actuator case
Timing, Nominal
Driving @ 60 Hz-- 175 sec
Feedback
2-10 Vdc
Manual operation
Knob
There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.