Privacy Statement
Skip Ribbon Commands
Skip to main content
SharePoint
  • Product Info
  • Literature

Overview

A self-checking flame detector using a solid state UV sensor to detect ultraviolet radiation in flames for supervision of gas, oil or combination gas-oil burners.

Features

  • Designed for use with 7800 series controls with the R7851C flame amp.
  • Oscillating shutter interrupts ultraviolet radiation reaching the UV sensor to provide the solid state UV sensor checking function.
  • Can be mounted horizontally, vertically or at any angle in between.
  • The detector requires faceplate alignment and has integral locating reference points to assure proper operation of the shutter mechanism.
  • Models available with threaded conduit fitting and color-coded leadwires allow rapid electrical installation.
  • C7961E1022 or E1030 5 pin Brad Harrison type (formally 41307N) mating connector not supplied nor available through Honeywell.
  • Incorporates UV sensor tube checking feature; used with R7851C1008 Dynamic Self-check Amplifiers.
  • Protective heat block built into mounting flange.
  • -40 F (-40 C) rated ultraviolet sensing cell is supplied.
  • C7961E meets NEMA 4 standards with viewing window rated to 20 psi.
  • C7961F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.

Product Specifications

Application
Gas, Oil or other fuels
Dimensions (in.)
3 3/4 in. diameter (5 1/4 in. diameter including mounting flange) x 7 7/32 in. long
Dimensions (mm)
95 mm diameter (133 mm diameter including mounting flange) x 183 mm long
Includes
Quartz Viewing Window rated for 20 psi (138 kPa)
Used With
R7851C Dynamic Self-Check Amplifier
Weight (lb)
2.6 lb
Weight (kg)
1.2 kg
Comments
Detects ultraviolet radiation generated by combustion of gas, oil, or other fuels
Mounting
1 in. NPT
Electrical Ratings
120 Vac (-15% +10%)
Frequency
50 Hz; 60 Hz
Approvals, Underwriters Laboratories Inc.
Component Recognized: File No. MP268
Approvals, Canadian Standards Association
Certified: Pending
Electrical Connections
5 pin Brad Harrison Type Connector
Approvals, Swiss RE
Acceptable
Approvals, Factory Mutual
Pending
Ambient Temperature Range (F)
-40 F to +175 F
Ambient Temperature Range (C)
-40 C to +80 C
NEMA Rating
NEMA 4
There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.