Skip Ribbon Commands
Skip to main content
  • Product Info
  • Literature


Solid state electronic flame detectors for use with Honeywell Flame Safeguard controls and amplifiers. Sense ultraviolet radiation produced by combustion of gas, oil, coal or other fuels.


  • Mount horizontally, vertically or at any angle in between.
  • Provide quick electrical hookup with threaded conduit fitting and color-coded leadwires.
  • Reduced nuisance shutdowns by wiring two in parallel.
  • C7012E1278 5 pin Brad Harrison type (formally 41307N) mating connector not supplied nor available through Honeywell.
  • C7012A,E meets NEMA 4 standards with viewing window rated to 20 psi.
  • C7012C,F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.

Product Specifications

Gas, Oil or Coal fired burners
Dimensions (in.)
8 in. diameter x 12 in. long
Dimensions (mm)
203 mm diameter x 305 mm long
Used With
Flame Amplifiers: R7247A,B; R7847A,B; R7257
Weight (lb)
14.5 lb
Weight (kg)
6.6 kg
Explosion-proof, two piece, violet, cast aluminum enclosure
1 in. NPT
Electrical Ratings
120 Vac
50 Hz; 60 Hz
Approvals, Underwriters Laboratories Inc.
Listed: File No. E34649, Guide No. ZTSZ
Approvals, Canadian Standards Association
Certified: Master Report LR95329-1
Electrical Connections
4 NEC Class 1 Color-coded lead wires.
Power Consumption
2.5 W
Approvals, Swiss RE
Approvals, Factory Mutual
Approved: Report No. 14740.01
Ambient Temperature Range (F)
25 F to 175 F
Ambient Temperature Range (C)
-4 C to +79 C
NEMA Rating
Explosion Proof
Lead Length (in.)
96 in.
Lead Length (mm)
2438 mm
There is no literature attached to this product, please try another material search. If you believe that there should be literature for this product, please contact Customer Care for website support.