V5047A1021/U

Two-way, Globe, 1 1/2 in, (Female) NPT, 30 Cv, Water or Glycol or Steam

Overview

Control high pressure steam, liquids, air or noncombustible gases where positive final shutoff is not required.

Q5001D Valve Linkage and Modutrol motor required for operation.
Suitable for two-position, floating, or proportioning control, depending on the motor and controller used.
Provide high capacity with minimum pressure drop.
Pipe sizes include 1, 1-1/4, 1-1/2, and 2 inches.
Straight-through construction and threaded end connections.
Cast iron body with stainless steel trim.
Plug provides equal percentage characteristic of flow.
V-port for either throttling or on-off service.
Replaceable seat rings screw into body.
Spring-loaded Teflon cone packing for minimum friction.

Dimensions (in.): 6 1/4 in. high x 3 1/8 in. wide x 5 1/2 in. deep
Dimensions (mm): 158 mm high x 79 mm wide x 139 mm deep
Maximum Safe Operating Pressure (psi): 150 psi water; 100 psi steam
Maximum Safe Operating Pressure (kPa): 1034 kPa water; 690 kPa steam
Used With: Q5001/Modutrol IV Motor
Comments: Double seated
Ambient Temperature Range (F): 32 F to 337 F
Ambient Temperature Range (C): 0 C to 170 C
Connection Type: Female NPT
Body Pattern: Two-way
Pipe Size (inch): 1 1/2 in.
Pipe Size (DN): DN40
Bonnet Size (in.): 1-3/8 in.
Capacity (Cv): 30 Cv
Capacity (Kv): 25.7 kvs
Valve Action: Stem down to close
Valve Type: Globe Valve
Controlled Fluid: Chilled or hot water with up to 50% Glycol or Steam. Not for use with fuels.
Materials (Body): Cast Iron
Materials (Seat): Stainless Steel
Materials (Stem): Stainless Steel
Materials (Cartridge): Stainless Steel
Flow Characteristic: Equal Percentage
Actuation: Must be purchased separately
Static Pressure Rating (psi): Meets ANSI 125 Standard
Static Pressure Rating (kPa): Meets ANSI 125 Standard
ANSI/ASME Rating: 125
Stem Travel (in.): 9/16 in.
Stem Travel (mm): 14 mm
Bonnet Size (mm): 35 mm
Materials (Packing): Spring loaded non-adjustable Teflon V-ring
Leakage: 0.005 of Cv